Microcement for Tiled Floors & Walls – MicroCem-FB Kit – 15 m²
Shadow / Matt
$925.58 AUD
Microcement for Tiled Floors & Walls – MicroCem-FB Kit – 15 m²
$925.58 AUD
A reinforced MicroCem-FB system for correctly prepared tiled floors and tiled walls.
Tiled substrates require Primer Beton and fibreglass mesh. Choose from 16 Nikkolor colours and Matt or Semi-Gloss Decor Finish.
Included
- 1 × 20 kg Nikkolor Primer Beton
- 18 m² pre-cut fibreglass mesh, including overlap and trimming allowance
- 1 × 20 kg Nikkolor MicroCem-FB
- Nikkolor toner in the selected colour and tone. Refer to the three tone options per 20 kg below.
- 1 × 2.5 L Nikkolor Decor Finish in Matt or Semi-Gloss
Three tone options per 20 kg
The same three tone options apply to all 16 Nikkolor colours, including Tapioca.
- TC Dark — 4 × 250 ml bottles per 20 kg
- TB Medium — 3 × 250 ml bottles per 20 kg
- TA Light — 2 × 250 ml bottles per 20 kg
This dosage guide applies to 20 kg Cemento 3D and MicroCem-FB packs. Toner is sold and priced per individual 250 ml bottle.
Coverage
Allocated for up to 15 m² over two MicroCem-FB coats. Actual coverage varies with substrate condition, thickness, texture and wastage.
Existing tile adhesion, joints, deflection and substrate stability must be assessed before application. This system does not replace compliant waterproofing, movement joints, falls, drainage or substrate repairs.
Made in Italy
Complete system approach
Architectural mineral finishes
Australian technical support
Complete the System
NIKKOLOR AUSTRALIA · SYSTEM GUIDE
Specify the finish. Understand the system.
A seamless MicroCem-FB system for floors and wet areas where durability, water resistance and a refined mineral character are required.
Before ordering
- Measure the total surface area and allow for waste, texture and substrate variation.
- Confirm that the substrate is sound, stable, clean and suitable for the complete system.
- Review the colour cards in the gallery; screen colour is indicative only.
Installation pathway
- Assess and prepare the substrate.
- Prime and reinforce where the selected system requires it.
- Build the decorative coats to the specified texture.
- Allow correct drying time, then apply the compatible protection system.
Care & expectations
- Hand application creates natural tonal movement and variation.
- Use pH-neutral cleaning products and avoid aggressive abrasives.
- Protect new work for the full curing period stated in the technical data.
- Retain product and colour records for future maintenance.
Professional specification note
Coverage is indicative and varies with substrate, application thickness, texture and waste. Product descriptions do not replace current technical data or project-specific advice.
LUX CEMENT RESOURCES