Answers to common questions about selecting, ordering and applying Nikkolor systems in Australia.
What is microcement?
Microcement is a hand-applied decorative surface system used to create continuous finishes across correctly prepared substrates. The finished appearance is created through the applicator's technique, chosen texture, colour and protective system.
What makes Cemento 3D different?
Cemento 3D is designed to offer more creative range than a conventional flat microcement aesthetic. It can be finished with restrained tonal movement or shaped into more expressive, sculptural surfaces.
When should I choose MicroCem-FB?
MicroCem-FB is the preferred family for refined continuous floors, wet areas, interior walls and specified pool systems. The required primer, reinforcement and protection system depends on the substrate and intended exposure.
Can it be used in pools?
The premium MicroCem-FB Pool System is intended for professionally specified pool, spa and immersed-surface applications with PRP protection. Pool shells, waterproofing interfaces, penetrations, falls and commissioning conditions must be assessed before work begins.
Can it be used on benchtops?
Yes, with the dedicated Cemento 3D Benchtop & Joinery build-up over a rigid, stable and correctly prepared substrate. Edges, cut-outs, heat exposure and expected service conditions must be considered during specification.
Can it be used in bathrooms?
It can form part of a bathroom finish system over a suitable, correctly prepared substrate. Microcement does not replace any waterproofing required by Australian building regulations. Waterproofing, junctions, falls, penetrations and movement joints must be completed and assessed before application.
Can it be applied over tiles?
Potentially, provided the tiled substrate is stable, well bonded and appropriately prepared. Loose tiles, movement, moisture, contamination, hollow areas and unsuitable joints must be rectified before coating.
Does every finish look identical?
No. Nikkolor surfaces are hand finished. Natural tonal movement, trowel character and controlled variation are inherent parts of the material rather than printed repetition.
How much does one kit cover?
The current complete system kits are allocated for up to 15 m² over their specified build-up. Actual usage depends on substrate condition, texture, thickness, wastage and applicator technique.
How should I choose a colour?
Use the 16 genuine Nikkolor colour cards shown in the product gallery as the starting point. Digital displays are indicative; request project advice where colour is critical.
Is professional installation recommended?
Yes. Correct substrate assessment, preparation, reinforcement and sealing materially affect performance. Nikkolor Australia recommends professional application or appropriate product training.
Where can I learn more?
Visit the Lux Cement Academy for training, or contact Lux Cement for project guidance.