Microcement Bathroom Kit – Cemento 3D – 15 m²

A complete Cemento 3D microcement bathroom system with total nominal coverage of up to 15 m².

The 15 m² figure describes the kit’s total nominal coverage. It does not mean 15 m² of bathroom flooring. The coverage may be allocated across selected bathroom walls, floors, or a combination of both, subject to the correct system being specified for each substrate.

Final suitability and component requirements depend on the substrate, surface condition, compliant waterproofing system, primer, reinforcement, application thickness, texture and wastage. Concrete, screed, plasterboard, Villaboard and existing tiled surfaces can require different preparation. Floors and tiled surfaces require the appropriate reinforcement system.

Included

• 1 × 20 kg Nikkolor Primer Beton
• 1 × fibreglass mesh allocation for up to 15 m² of applicable reinforced area
• 1 × 20 kg Nikkolor Cemento 3D
• Nikkolor toner in the selected colour and tone. Refer to the three tone options per 20 kg below.
• 1 × 2.5 L Nikkolor Decor Finish in Matt or Semi-Gloss

Three tone options per 20 kg

The same three tone options apply to all 16 Nikkolor colours, including Tapioca.

• TC Dark — 4 × 250 ml bottles per 20 kg
• TB Medium — 3 × 250 ml bottles per 20 kg
• TA Light — 2 × 250 ml bottles per 20 kg

This dosage guide applies to 20 kg Cemento 3D and MicroCem-FB packs. Toner is sold and priced per individual 250 ml bottle.

Pricing

The displayed price is the live base price for the kit before toner. The required 250 ml Nikkolor toner bottle quantity is added at its current per-bottle price when you select a colour and tone, and the complete total is shown before you add the kit to cart.

Coverage

Provides up to 15 m² total nominal coverage over the specified Cemento 3D build-up. Actual coverage varies with substrate condition, texture, thickness, application technique and wastage.

This system does not replace compliant bathroom waterproofing, falls, drainage, movement joints or substrate repairs. Waterproofing, residual moisture and substrate suitability must be confirmed before application. Do not apply the next system stage unless the substrate and preceding coat meet the relevant cure and moisture requirements.